Impact-Resistant shingles on a North Texas home under a clearing storm sky

JBN Roofing of Texas · A Division of The JBN Group, Inc.

Impact-Resistant Roofing

Shingles tested to take a hit, so hail season stops being a coin toss.

Impact-Resistant roofing gives North Texas homes a shingle that has been lab-tested against hail impact under UL 2218, the standard that rates shingles Class 1 through Class 4. Class 4 is the top rating: the shingle takes repeated two-inch steel ball strikes in the same spot without cracking. JBN Roofing of Texas installs impact-resistant shingles at replacement, matched to your home, your deck, and your budget, and prices the full job in writing before any work begins. Call 469-340-0838.

One Family, Since 1996The roofing division of The JBN Group, Inc., owned by one family from the start.
Tested, Not GuessedEvery shingle we offer carries a published UL 2218 class, so the rating is on paper, not in a sales pitch.
A+ BBB · Fully InsuredAn A+ Better Business Bureau rating, with full insurance on every home we roof.
Priced Once, in WritingOne written price for the whole replacement before you sign, with no allowance games.

What the rating means

Impact-Resistant, Explained in Plain Terms

Impact resistance is a test result, not a marketing word. Under UL 2218, shingles are struck with steel balls of increasing size, dropped from twenty feet, twice in the same spot.

The class follows the largest ball the shingle survives without cracking: Class 1 up through Class 4, the highest rating given. The test runs in a lab, on new shingles, under controlled conditions.

Real hail varies in size, hardness, and angle, so no rating makes a roof hail-proof. What a Class 4 shingle buys a homeowner is margin: the hits that crack a standard shingle are the hits it was built to absorb.

Not sure what your roof carries now? Call 469-340-0838 for an on-roof inspection.

Where impact resistance leads

Start With the Shingle, Then the Whole Roof

An impact-resistant roof is more than one product. These are the pages homeowners pair with it most.

How a replacement runs

The Six Steps Inside Every Impact-Resistant Replacement

The shingle gets the headline. These six steps, in order, decide what the rating is worth on your house.

01

Inspect the Roof You Have

The job starts on your roof: shingles checked for hail strikes, bruising, and granule loss, decking felt for soft spots, and the attic checked for leaks. Photographs document what the storm seasons have already done.

02

Read the Damage Honestly

Hail damage, wear, and old age look similar from the ground and very different up close. The inspection separates storm strikes from blistering and wear, so the scope, and any insurance conversation, rests on evidence, not adjectives.

03

Choose the Class Together

Class 4 costs more than a standard shingle and less than a second replacement after the next big hail season. We lay the classes, colors, and prices side by side in writing, and the choice stays yours.

04

Install the Full System

Underlayment, starter, field shingles, ridge, and flashing go on as one rated system, nailed to the manufacturer pattern. A Class 4 shingle over sloppy underlayment is a rating wasted, so the layers under it get the same care.

05

Detail the Weak Points

Valleys, vents, chimneys, and wall lines are where roofs leak, whatever the shingle rating says. Flashing is replaced or renewed at every penetration while the roof is open, because hail resistance means nothing beside a rusted vent boot.

06

Walk It and Photograph It

The finished roof is walked and photographed before the crew leaves: rows straight, ridge seated, details sealed. You get the product paperwork with the class rating on it, so what was promised is what the documents say.

The Two-Inch Test

In the UL 2218 Class 4 test, a two-inch steel ball is dropped on the shingle from twenty feet, twice in the same spot. Cracking fails it. That is the whole standard: no cracked shingle, top rating.

Request Your Free Quote
Impact-Resistant: shingle sample marked up for impact testing

Why standard shingles lose

Why Standard Shingles Lose to North Texas Hail

A standard shingle is built to shed water and resist wind. Hail was never its design brief, and North Texas delivers some of the most damaging hail in the country.

A hard strike bruises the mat under the granules. The surface can look nearly fine while the shingle's life has been cut short, which is why hail damage hides until leaks appear or a home-sale inspection finds it.

Impact-resistant shingles are the answer aimed at exactly that failure: a tougher mat and a stronger build, proven in the lab before the storm does the testing.

  • Bruised mats under intact-looking granules
  • Cracked shingles at strike points
  • Granule loss that shortens service life
  • A clear test: UL 2218, Class 1 through 4

The company

JBN Roofing of Texas, a Division of The JBN Group, Inc.

The JBN Group, Inc. is a family-owned general contractor founded in 1996, based at 125 Old Alton Drive in Denton, Texas. JBN Roofing of Texas is its roofing division, working from Suite 8 at the same address and roofing homes across North Texas. The group carries an A+ Better Business Bureau rating and is fully insured. Reach the roofing team at 469-340-0838 or sales@jbnroofingoftexas.com.

When it is time

Replacement Is Where the Rating Gets Added

You cannot retrofit impact resistance onto an old roof. It arrives with the new one.

Shingles are a system laid in courses. The rating belongs to the product on the deck, not to anything sprayed or patched on later. That is why the impact conversation belongs at replacement time, when the deck is open and every layer is being chosen anyway.

JBN Roofing prices the standard and impact-resistant options side by side in the same proposal, so the upgrade is a number you can weigh, not a pitch you have to trust.

  • Standard and Class 4 priced side by side
  • Deck inspected while the old roof is off
  • Flashing renewed at every penetration
  • Rating paperwork handed over at the end
Impact-Resistant: close view of architectural shingle texture and granules
1

Inspect and Document

The existing roof is inspected on the roof and photographed: strikes, wear, decking, and flashing recorded before anything is proposed.

2

Price Both Options

Standard and impact-resistant systems are priced in the same written proposal, with the product and its class named, so the comparison is apples to apples.

3

Tear Off and Install

The old roof comes off, the deck is checked and repaired where needed, and the new rated system goes down layer by layer.

4

Prove the Rating

The finished roof is walked and photographed, and the product documents showing the UL 2218 class are handed over with the final paperwork.

Impact-Resistant: dark storm clouds gathering over a residential neighborhood

The honest fine print

What Impact-Resistant Cannot Promise

No shingle is hail-proof, and no lab rating repeals a Texas storm.

UL 2218 tests new shingles with steel balls under controlled conditions. Real hailstones vary, roofs age, and a big enough storm damages almost anything. What the rating honestly buys is a tougher roof with a tested margin, installed as a system and documented on paper. Insurers set their own rules, too: if a discount matters to you, ask your carrier what they credit, and get their answer in writing.

Ask any bidder which class they are quoting. Call 469-340-0838 and ask for the rating in writing.

Where we work

Impact-Resistant Roofing Across North Texas

From our Denton office, JBN Roofing of Texas replaces roofs across the northern Dallas-Fort Worth area, where hail season runs long and the stones can grow big enough to dent trucks. Homeowners here do not ask whether hail is coming, only when.

Own a home outside that area? Call 469-340-0838 and ask. If your home is beyond where we work well, we will say so plainly.

Ranch HomesTwo-Story HomesBrick HomesSubdivision HomesLake HomesTownhomesHistoric HomesNew-Build Homes

What the Inspection Covers

  • Hail strikes counted and photographed
  • Granule loss and bruising checked by hand
  • Decking and attic leak check
  • Standard vs. Class 4 priced in writing
  • One written price for the full job

Independent profiles you can check

Verify The JBN Group, Inc.

JBN Roofing of Texas is a division of The JBN Group, Inc. Check the company on its independent profiles before you sign: each badge below links to the live listing on that platform.

Straight answers

Impact-Resistant FAQs

What does impact-resistant mean for a shingle?

It means the shingle passed a standardized impact test, UL 2218, and earned a class from 1 to 4. Steel balls are dropped on the shingle from twenty feet, and the class follows the largest size it survives without cracking. Class 4 is the highest rating.

Are Class 4 shingles worth the extra cost?

For many North Texas homes, yes. They cost more than a standard shingle and are built to survive strikes that crack standard shingles. Weighed against a second replacement after a bad hail season, the upgrade often prices out in the homeowner's favor. Your written proposal prices both, so you can decide on numbers.

Will Class 4 shingles lower my insurance?

That is your carrier's decision, not ours, and it varies by insurer and by policy. Some carriers credit impact-resistant roofs and some do not. Ask your insurer what they credit before you buy, and keep the rating paperwork we hand over either way: it is the proof of what is on your roof.

Can impact-resistant shingles be added over my old roof?

No. The rating belongs to the shingle itself, installed as a system over sound decking. A roof-over also hides deck damage and wastes the point of the upgrade. Impact resistance is a replacement-time decision, which is why we price it side by side with the standard option.

Does a Class 4 roof still get hail damage?

It can. The rating is a lab test on new shingles, and a severe enough storm can damage any roof. What Class 4 changes is the threshold: strikes that crack standard shingles are the strikes it was tested to take. After any major storm, an inspection is still the right call.

How do I know what class I am being quoted?

Ask for the product name and its UL 2218 class in writing, and check the rating in the manufacturer's published literature. Our proposals name the product and the class, and the paperwork handed over at the end matches what was installed.

Tested · Rated · Documented · Installed

Hail Is Coming. Put a Rated Roof Over Your House.

One inspection documents your roof as it stands, and one written proposal prices the standard and impact-resistant options side by side. Then the next storm is weather, not damage waiting to be found.